MediACE3D V1
User's Manual
×
Menu
Index
Search
 
   
   
   
 
  © Copyright 2020 RealDimension Inc. - All Rights Reserved

Insole Image

Create an Insole profile model using the shoe's insole photo file taken on A4 or A3 size paper.
In order to get a picture that fits the actual size of the insole, you should take it at a distance of about 50cm from the object with a mobile phone camera.
 
* This function is always used together with the Insole Design function, and it helps to edit the curve of the insole profile created in the Insole Design function to fit the exact shoe insole.
 
 
Insole Image
 
1

Mesh Model

1. Mesh Model
 
Select the target mesh model (Foot Model with Skeleton).
When the insole image model function is executed, the sole profile is automatically added as based the reference point of the skeleton of the foot model.
 
 
2

Load Insole Image

2. Load Insole Image
Load the shoe's insole photo file taken on A4 or A3 size paper.
 
Open the insole photo file
 
Set the left and right feet with left-right flip.
   
 
Set the toe and heel position with image rotation.
   
 
* The toe position of the insole should always be upward.
 
Specify the four corner points of the paper and the heel center point of the insole photo.
 
Create an insole profile shell model that maps the insole photo.
 
 
  
3

Move & Rotate

3. Move & Rotate
 
Adjust a position of the sole profile to fit the foot size.
 
 
4

Run

Run to generate the insole shell model, including a photo image.
 
The insole shell model is created by adding subscripts such as _N0 to the selected model name and displayed in the project tree.
 
     
 
 
The Insole Model can be designed by accurately fitting the sole profile to the actual shoe insole size by matching the insole photo mapping model created with the Insole Image to the foot model and insole profile model created with the Insole Design function.