Invert the mesh model based on the YZ plane.
![1](drex_bullet_1.png) Select Mesh Model
Select target mesh model.
|
|
![2](drex_bullet_2.png) Copy Model
When creating a new mirror model, check the Copy Model option.
|
|
![3](drex_bullet_3.png) Copy Curve
Check whether to copy curves included in the selected model.
|
|
![4](drex_bullet_4.png) Run
Proceed operation.
|
|
![5](drex_bullet_5.png) Reset
Return mesh model to pre-operation state.
|
|