User can move and rotate the mesh model based on local coordinate system.
Prepare a mesh model for the orthosis design.
 Select Mesh Model
Select target mesh model.
|
|
 Move/Rotate
Click the ’Start’ button to start to move/rotate the target mesh model.
The local axis system for a transform will appear.
User can transform a model by move the axis line or rotate the circle.
User can finish mesh model transition by clicking ‘End’ button.
|
|
Set the position of the scan model for the orthosis design.
Display multiple viewport screens and move and rotate the scan model to set the appropriate position.
 Align on X-Y Plane
Click the ’Picking 3 points’ button to align on the XY-plane the target mesh model.
Click the ‘Run’ button to finish model alignment or click the :Cancel" button to cancel the operation.
Align the model plane made of 3 points on the XY-plane.
The Y-axis direction is determined from the first point to the second point.
|
|
 Reset
Return mesh model to pre-operation state.
|
|